Fuel Hose Upgrade Kit for TVR Chimaera, Griffith

Complete fuel hose upgrade kit comprising of the following:

  • R9 Compliant Fuel Hoses
    SAE J30R9 compliant performance composite rubber fuel hoses with 6 US Tridon stainless steel hose clips. The kit will also include 6 additional clamp style fuel clips, these have a much lower torque rating but may be preferred by certain installers. This fuel hose is an up to date improvement on the factory fit hoses, constructed of composite NBR/SBR braid reinforced rubber for use with modern higher ethanol fuels. The fuel hoses are rated at 150 degrees Celsius with a working pressure of 225 psi.
  • Optional Hose Finishers for two fuel hoses
    Set of two optional hose finishers in Red, Blue or Black anodised aluminium with SS worm drive.


  • Hose : Nitrile/Styrene Butadiene  rubber with polyester fibre reinforcement braid.
  • Hose Inside Diameter (in : cm): 5/16” : 8mm
  • Hose Outside Diameter (in : cm): 17/32″ : 15mm
  • Maximum Operating Pressure : 225 PSI
  • Burst Pressure Min : 900 PSI
  • Bend Radius Min (in) 2”
  • Temp range: -40 deg C to + 150 deg C
  • Compliant with SAE J30R9




If you cannot find the part your looking for, visit the contact page.